毕业论文—车床功能部件开发----动力刀塔导轨工程分析.docVIP

车床功能部件开发----动力刀塔导轨工程分析 摘 要 复合机床是现代化生产必备的生产母机，由于现代化零件结构越来越复杂，普通车床已无法生产这样的零件，因此我国越来越多的企业开始使用复合机床来进行生产，所以很多机床便处于废置状态。那么如果对车床进行复合化改装，这样便可以解决小企业无法支付昂贵的复合机床，并且还可以改善车床废置而造成的资源浪费。 本课题中所采用的方式是通过设计开发出一种功能部件，将其添加到普通数控车床上来实现车床的复合加工。其功能部件主要由动力刀塔和立柱组成。本文主要针对其中间用于连接的直线滚动导轨来进行工程分析。首先运用三维建模软件SolidWorks建立了直线滚动导轨各零部件的实体模型并进行了装配，然后运用有限元分析软件ANSYS Workbench针对动力刀塔在垂直方向铣削加工时导轨的受力情况进行了工程静力学分析，获得了直线滚动导轨在实际工作情况下的应力、应变、总变形及安全系数等的大小及分布情况，从而为设计、制造出可靠性较高的提供了参考依据。Lathe features development —— Power tool turret guide engineering analysis Abstract Compound machine tool is indispensable for modern production, Due to the modern structure of mechanical parts is more and more complex，this engine lathe has been unable to those production operation. So our country more and more enterprises began to use composite machine for production, many machine tools in the abolition of state.If compound modification was carried out on the lathe, it can solve small enterprise can not afford the expensive compound machine tool, and also can improve the status of the the waste of resources caused by the lathe scrap. The method used in this subject is design to develop a functional unit, then add it to the numerical control lathe, to achieve compound machining of the CNC lathe.Its feature is mainly composed of dynamic knife tower and pillar.This article mainly aims at the linear rolling guide which used to connect between dynamic knife tower and pillar for engineering analysis. Use three dimensional modeling software SolidWorks first established the physical model of parts and the assembly, then using the finite element analysis software ANSYS Workbench aims at the dynamic knife tower milling in the vertical direction, the force of the guide for the engineering statics analysis,and obtained the linear rolling guide in actual working situations about the size and the total distribution of stress, strain, deformation and safety factor ,these datas provides reference basis for design, produce high reliability of linear r