多通道位移测量仪..docVIP

《传感器技术》课程设计 课题： 多通道位移测距仪 班 级 测控1121 学生姓名 丁帅 学号 1121203111 指导教师 张青春 淮阴工学院电子与电气工程学院 多通道位移测量仪 摘　要: 借助于虚拟仪器技术, 探讨了将虚拟仪器技术应用于位移测量领域的方法, 以L abV IEW 为开发平台, 设计了 一种多通道虚拟位移测量仪, 界面简单、方便实用, 解决了多点监测、实时性等问题。详细叙述了多通道位移测量虚拟仪 器的设计步骤。 关键词: 虚拟仪器技术; L abV IEW; DAQ; 多通道; 位移测量仪 Des ig in and Research of M ult ichannel D isplacemen tM ea sur ing In strumen t Ba sed on LabVIEW ZHAN G Q ingchun, GOU L anlian (Electronic Info rmation Engineering Department, Huaiyin Institute of Techno logy, Huaian, 223001, Ch ina) Abs tra c t: The method of disp lacement measuring field w ith virtual inst rument techno logy is discussed by the (V I) techno logy1A virtual mult ichannel inst rument of disp lacement measurement is desiged by L abV IEW based technique1The simp le interface and mult ichannel disp lacement measuring inst rument1 Ke yw o rds: virtual inst rnment techno logy; L abV IEW; DAQ; mult ichannel; disp lacement measurement inst rument 目录 第一章 课程设计简介························ 1.1设计目的·························· 1.2设计要求··························· 1.3课程设计报告格式······················· 第二章 绪论 2.1位移测量及其传感器简介················ 2.2 国内外位移测量技术简介················· 第三章 系统方案设计 3.1 概述····························· 2.2 系统方案框图························ 第四章 工作原理 4.1 检测原理························· 4.2 传感器选择························ 4.3 测量电路介绍························ 4.4 误差分析与修正······················ 第五章 系统软件设计 5.1 软件设计方法························ 5.2 测试系统流程图························ 5.3 系统软件························· 第六章 系统调试与验证 6.1　硬件调试························· 6.2　软件(程序) 调试······················· 第七章 单片机设计方案简介 7.1硬件电路的设计························ 7.2程序框图设计························· 7.3程序代码设计···························· 第八章 课程设计体会与总结························ 附录：1、参考资料···························· 2、元器件表························· 第一章 课程设计简 1.1设计目的 通过解决一个实际问题，巩固和加深在《传感器技术》课程中所学的理论知识和实验技能，基本掌握非电量自动检测系统的一般设计方法，提高自动检测系统的设计和创新实践能力。