7_TS3000机组综合控制技术(ITCC)及特点汇编.ppt

The secret to good turbine control is accurate measurement of the speed. The plot shows a turbine with a constant speed of 5000 rpm being measured by a device with an accuracy of 0.25% and one with an accuracy of 0.01%. The less accurate measurement will require either a filter or averaging routine to improve the accuracy or significant de-tuning to prevent unnecessary reaction of the speed controller. The red line is an RMS average of the black (0.25%) plot over 5 scans. The Cyan line is the RMS average over 10 scans. The speed select block will take up to four speed inputs and output a sele