学位论文_贵南二级公路沥青路面设计.doc

南 阳 理 工 学 院 本科生毕业设计 学 院： 土木工程 专 业： 土木工程 学 生： 指导教师： 完成日期 2013 年 5 月 南阳理工学院本科生毕业设计 南贵二级公路设计（沥青路面） Nan Gui Secondary Road Design (Asphalt Pavement) 总 计： 92 页 表 格： 29 个 插 图 ： 7 幅 南 阳 理 工 学 院 本 科 毕 业 设 计 南贵二级公路设计（沥青路面） Nan Gui Secondary Road Design (Asphalt Pavement) 学 院： 土木工程 专 业： 土木工程 学 生 姓 名： 学 号： 指 导 教 师（职称）： 评 阅 教 师： 完 成 日 期： 2013.5 南阳理工学院 Nanyang Institute of Technology 南贵二级公路设计（沥青路面） ［摘 要］［关键词］Nan Gui Secondary Road Design (Asphalt Pavement) Civil Engineering (The Direction of Highway and Bridge) Abstract: The design in this thesis is the Nan Gui secondary road design (asphalt pavement) with the total road length of 2275.06 meters and the designed vehicle speed of 60 kilometers per hour. The contents of the design consist of three aspects, including route design, roadbed and pavement design and construction organization design. At first, the design determines two feasible programs in accordance with the topographic map by collecting relevant data and makes planar design, longitudinal section design and cross section design on the best program selected. Then the checking calculation of the roadbed stability, the road drainage design and the pavement structure design are conducted in accordance with the results of the road design section. At last, the construction organization design is conducted. In addition, the thesis presents the related calculating processes, tables and drawings respectively. Key words: secondary road; road design; roadbed and pavement design; constru -ction organization design 目 录 1 绪论 1 1.1 选题的目的、意义 1 1.2 主要内容及技术要求 1 1.2.1 主要内容 1 1.2.2