01、FLOW_3DV11介绍分析.pptVIP

Fluid internal energy advection must be activated before any heat transfer can occur. There are two selections: 1storder and second order monotonicity preserving. The first order is robust for most applications and 2ndorder monotonicity is used if thermal gradient are important like in thermally buoyant flows * * * This is a simple model and is also very thin. In a more complicated geometry the speed up could be more significant * * * Limitations of the model include no buoyancy or oxide film strength effects. The oxide film sticking to mold walls and foam residue escape through a porous s