- 42
- 0
- 约1.29万字
- 约 8页
- 2017-01-06 发布于贵州
- 举报
CCU50计算方法CCU50计算方法
CCID50 (cell culture infective dose 50%) 细胞培养半数感染量。 主要用于检测病毒滴度。将病毒按照倍比稀释或梯度稀释后接种细胞(每个稀释度接种4孔或6孔细胞),观察细胞CPE,通过Reed-Muench法计算CCID50,得到病毒滴度。这种方法主要用于测定病毒毒力滴度用.有了这个标准,就可以用100*CCID50或200*CCID50等,往下做一系列跟病毒有关的其他定量的实验,如中和实验中抗体效价测定等。更具体的操作方法计算和分析,参见病毒学书本,动物病毒学(殷震,刘景华主编)第二版上也有的。 S.O.P.2: ESTIMATION OF VIABLE MYCOPLASMA CONTENT OF CBPP VACCINES (Microtitration?Method)
The test for the determination of viable Mycoplasma content of CBPP vaccines should be carried out on at least three vials of each freeze-dried or three bottles of each liquid vaccine batch.
针对于每批冻干或每批液体疫苗,CBPP疫苗中支原体活力测定实验应该至少测试三小瓶中。
The Test should be performed in parallel with a control vaccine preparation. For each test result to be valid the tire of the control vaccine preparation should not exceed 2 times the standard deviation of the calculated reference titre. Each titration shall be based on the use of ten-fold dilution series of the reconstituted vaccine and not less than 10 wells per dilution.
测试应该与疫苗准备同时进行。对于每个对照疫苗活力的结果不应该超过计算参考滴度标准差的2倍。每次滴定应该使用十倍稀释方法重组疫苗并且每次稀释不能少于10孔。
NB:?The minimum titre per (cattle) field dose should be at least 107?viable mycoplasmas. However taking into account the local storage and transportation conditions it is recommended that production laboratories should endeavour to deliver vaccine with at least 108?mycoplasmas per dose.
NB:每段疫苗剂量的最低滴度至少应该在107,然而考虑到本地储存和运输条件,建议生产实验室应该努力每剂疫苗应该至少108.
I. Equipment
Sterile 96-well microtitration plates (Flat or U-bottomed)
Plate sealer
Glass of plastic bijoux bottltes (7 ml)
Universal containers(30 ml)
Pipetters. range 40 to 200 μl and 200 to 1000 μl
Eppendorf multipette(R)?4780 or other type of suitable repetitive pipette
Combitips, capacity: 2.5 ml, range 50–250 μl
Microplate reader (viewer)
1.设备
无菌96孔微型滴定板(平板或U型底)
平板密封机
移液枪:40微升到200微升和200微升到1000微升
Eppendorf multipette(R)?移液枪或者其他类型适合的移液枪
枪头,规格2.5ml,50-250微升
酶标仪
II. Materials
CBPP vaccine (freeze-dried or liquid)
Water, pyrogen free, high purity, ionic strength less than 2.0 Siemens
您可能关注的文档
- CAD机械制图规范.doc
- CAD期末题目.doc
- CAD电气制图报告.doc
- CAD画图规范.doc
- CAD模板制作说明书.doc
- cad的使用技巧.doc
- cad指令123.doc
- CAD的快捷键.doc
- CAD练习题答案.doc
- cad练习题.doc
- 菲涅耳体旅行时层析成像方法:原理、应用与展望.docx
- 信用风险视角下可转换债券二叉树定价模型构建与实证探究.docx
- 工业废渣复合制备高性能水泥的探索与实践:工艺、性能与应用.docx
- 生物技术专利保护:现状、挑战与应对策略研究.docx
- 基于ARM的织机主控制系统:设计、实现与应用.docx
- 最惠国待遇原则剖析:从理论基石到“搭便车”困境与应对.docx
- 机械荷载与氯盐环境耦合下混凝土结构耐久性的多维度探究.docx
- 多元视角下网络舆情倾向性分析方法的深度剖析与实践.docx
- 稀土掺杂氟化物纳米晶:宏量制备技术革新与多元应用探索.docx
- 分形几何赋能虹膜识别:算法创新与性能优化研究.docx
原创力文档

文档评论(0)