[液晶1602和12864原理图程序.docVIP

1:12864protues图 2：范例程序 滚动显示“白日依山尽，黄河入海流。。。。。。。。。。” #includereg51.h #includeintrins.h #define uchar unsigned char #define uint unsigned int sbit e=P2^0; sbit rw=P2^1; sbit rs=P2^2; sbit cs2=P2^3; sbit cs1=P2^4; sbit busy=P0^7; sbit reset=P2^5; uchar code data1[]={}; //省略了字模O(∩_∩)O哈哈~ //*********延时程序********* delay() { uchar q; for(q=0;q10;q++) {;} } //********写控制命令******** trans1(uchar receive) { delay(); e=1; rw=0; rs=0; P0=receive; delay(); e=0; } //********写数据命令******** trans2(uchar receive1) { delay(); e=1; rw=0; rs=1; P0=receive1; delay(); e=0; } //*******初始化程序********* init() { uchar i; delay(); trans1(0x3e); //显示开 delay(); trans1(0x40); // 起始行位置为第一行 } //********主程序************ void main(void) { uint k=0,q,clycle,ct=0,ct2=63,yy=0,ty; uint w; delay(); init(); //初始化 delay(); while(1) { w=0; trans1(0xb8); //页0显示 trans1(0x4f); //从0列开始显示 for(q=0;q4;q++) //八页显示 { for(clycle=0;clycle2;clycle++) { ty=0x4f; cs1=0; cs2=1; if(clycle==1) {cs1=1;cs2=0;delay();ty=0x40;} for(yy=0;yy3;yy++) //*64*列显示 { trans1(0xb8+q*2); trans1(ty+16*yy); delay(); for(k=0;k32;k++) {if(k==16) {trans1(0xb8+q*2+1);trans1(ty+16*(yy));} trans2(data1[w+k]); } w+=32; } } } ct2--; cs1=0;cs2=0; for(k=0;k200;k++) {trans1(0xc0+ct2);} if(ct2==0) { ct2=63;reset=1;reset=0;} } } 3:1602protues图 4：例程 #includereg51.h #includeintins.h #define uchar unsigned char #define uint unsigned int sbit ds=P2^0; sbit wr=P2^1; sbit e=P2^2; uchar clycle; uchar code data_1[]={you are the NO.1}; uchar code