陵大庄新井设计煤矿说明书--本科毕业论文.docVIP

大陵庄新井设计 采矿工程08 王群 指导教师 郝彬彬 摘要 在毕业设计之前，我们设计组在高老师的带领下深入到矿区进行为期一个月的毕业实习，在此期间我们搜集了所有毕业设计所需的资料，同时在生产一线积累了实际生产和管理经验。通过实习使我们更加深刻地了解到我们以后的工作，并且学到了重要的设计思想及设计中所涉及的现场工作经验，为毕业设计打下了良好的基础，也为以后的工作也积累了宝贵的经验。 本次毕业设计是在高老师和郝老师的指导下完成的，是我们大学四年学习采矿工程专业的一个全面的总结。 富润矿井初步设计包括以下几个部分： 1.、矿区自然地理、水文、地质、交通等基本情况概述； 2.、矿井井田范围内煤的地质储量、工业储量及可采储量； 3.、矿井生产能力及服务年限； 4.、矿井井田的总体开拓设计，井筒位置及形式选择、水平划分、延伸方案确定、采区划分、井底车场的确定及线路计算、硐室布置等内容； 5.、矿井采区的布置、工作面布置、生产运输机械选型、生产程序安排、采区车场的设计及生产工作面回采工艺的确定。 6.、矿井生产系统。包括提升、运输、通风、排水等系统的确定和设备选型及相关硐室的布置。 本次设计共用时12周，时间较为充足。由于个人水平有限，缺少现场生产经验，所以在设计中难免有不足之处，恳请各位老师给予批评指正，最后谢谢高老师与郝老师半年的辛勤指导。 关键词：地质构造、开采水瓶、开拓方式、采煤方法、井底车场。 Abstract This graduation design is about the new mine planning for the first mineral of Furun coal mine. which is a coal mine belonging for Hebei Ji zhong neng yuan Han dan CMA. Before the graduation, we design group, led by the teacher Cui Jingkun deep into the mine for one month of graduation practice, during which we collected all the information needed to graduation, while the actual production line has accumulated experience in production and management .Through the practice so that we more deeply understand our future work, and learned an important design ideas and design experience in field work involved, for the graduation project has laid a good foundation for the future work and accumulated valuable experience. The graduation project is Cui under the guidance of teachers and students to complete, and is four years of university study mining engineering a comprehensive summary. Furun preliminary design of mine include the following components: 1., Mining of natural geography, hydrology, geology, transportation and other basic information outlined; 2., Ida mine coal reserves within the industrial reserves and recoverable reserves; 3., Mine production capacity and service life; 4., Ida mine the overall development design, shaft location and form of selection, the level of division, extending the program to determine, by mining areas, the determinatio