学位论文_水轮机结构设计.docVIP

摘 要 本次毕业设计根据水电站的水力参数和要求，确定了水轮机的机型及型号（HL240/D41-LJ-200）。通过选型计算及相应的运行工况分析，绘制出水轮机运转综合特性曲线。在满足选型设计的条件下,进行了导水机构运动图的绘制；进行了水轮机蜗壳水力设计；并绘制了蜗壳水力单线图、尾水管设计、水轮机结构设计，其中包括水轮机剖面图及导叶加工图，并且建立了活动导叶的三维模型。最后对蜗壳的强度进行了计算。 关键词：水轮机；选型设计；结构设计；强度计算 Abstract Based on the actual request and hydraulic parameters provided of Songlinpo hydropower station , the type selection design and structure design were completed. The seleted type of turbine type is HL220/D41-LJ-200. Through the type selection design calculation as well as the corresponding operating situation analysis, designer draws the performance combine