十字头体的加工工艺规程及铣床夹具设计（全套含CAD图纸）.doc

买文档送CAD图纸，QQ毕业设计说明书 课 题：十字头体的加工工艺规程及铣夹具设计 子课题: 同课题学生姓名: 专 业 机械制造与自动化 学生姓名 班 组 学 号 指导教师 完成日期 摘 要 本篇设计是十字头体加工工艺规程及铣两侧面夹具设计。十字头体零件的主要加工表面是外轮廊表面及孔。一般来说，保证平面的加工精度与保证孔系的加工精度相比，保证平面的加工精度比较容易。侧面加工都是选用专用铣面夹具，夹紧方式一般选用手动夹紧，夹紧可靠。因此生产效率较高。能够满足设计要求。 文章的重点在于对十字头体的工艺性和力学性能分析，对加工工艺进行合理分析，选择确定合理的毛坯、加工方式、高效设计、省力的夹具，经过实践证明，最终加工出合格的十字头体零件。 关键词：工艺编制，加工时间，专用夹具，生产率 Abstract The crosshead body is an important part of the compressor, is connected to the piston and connecting rod parts, has a guiding role; Size is larger, carrying a large pressure. Is to convert rotary motion to reciprocating motion of the joints. The design of the processing technology of the air compressor parts crosshead body discipline, optimized design of the technology, technological characteristic analysis of parts at the same time, the machining allowance, planetary computing processing precision, processing time, the key is to make sure the crosshead body strength and rigidity performance, ease of installation, adjustment and maintenance. The crosshead body is made of cast iron casting forming, generally after machining to its processing to use requirement, in the process of production, the processing technology of the crosshead body custom is very important, process of determines the accuracy of the parts and the production efficiency, especially in the mass production parts, the technical process to production into consideration. At the same time, in order to ensure the workpiece machining accuracy, and in order to improve the productivity and special fixture design of each process, is the operator to use simple, rapid and accurate, and on the premise of guarantee accuracy greatly improved productivity. Key words: machining process, machining time, special fixture, productivity  目 录 第一章 加工工艺规程设计 1 1.1 零件的分析 1 1.1.1 零件的作用 1 1.2 十字头体加工的问题和工艺过程设计所应采取的相应措施