毕业设计（论文）-塑料簸箕模具设计（全套图纸）.doc

本科毕业论文（设计） 题 目 塑料簸箕模具设计 学 院 工学院 专 业 机械设计制造及其自动化 班 级 12机制本4班 学 号 学生姓名 指导教师 完成日期 2016.5.4 西安思源学院教务处制 二〇一 六 年 五 月 摘要 本文是对塑料簸箕进行模具设计，首先分析塑件所用塑料硬聚氯乙烯(HPVC)的工艺特性和成型特性以及塑料簸箕结构工艺性。同时，利用Pro/e软件计算出塑件、浇注系统的体积和质量，根据塑件、浇注系统的体积和质量的估算，选定注塑机型号为XS-ZY -1000;还根据塑件选定模架;并对注射机和模架的相关参数进行校核（如最大注射量、锁模力、最大注射压力、开模行程等）；根据塑料簸箕结构特征，分型面应选择在塑件的最大截面处;再然后是对浇注系统的设计以及导向机构的设计;推出机构根据塑件形状采用推杆推出，并对其推出力进行校核;为了使塑件快速冷却成型，还设计了冷却系统，冷却系统设置便于塑件的推出；最后进行模具的装配设计。 关键词: 塑料簸箕 模具 分型面 装配 全套图纸，加153893706 ABSTRCT Plastic molding products are plastic as the main structural material. The processing of products.Referred to as the plastic parts.plastic molding products arewidely used.Especially in the electronic instrument electrical equipment ,communication tools ,etc to obtain a large number of applications . such as all kinds ofstress are shell stents structure decoration.Based process equipment as the main production of plastic products of plastic mold .occupies an important positionin national economy mould technology has also become to measure a national product manufacture level of important symbol.Injection molding plastic molding isan important method .it is mainly suitable for thermoplastic molding .and canbea complicated shape of precision plastic forming parts is the adsl surface hella a design model .This paper will be injection mold related knowledge as thebasis.the overall design process of plastic injection mould are expounded. Design the content of this article is shell of plastic injection mould ,materials for HPVC .According to the shape of the structure characteristics and throughthe analysis of the right across the shell molding process,determine the overall distribution of cavity choose the parting surface determine the demoulding way .The design of gating system,etc. Keywords：Plastic moldinjection molding； the parting surface