sprinklersystem-hawaiidepartmentoftransportation.docVIP

Amend Section 616 - Sprinkler System to read as follows: “SECTION 616  SPRINKLER SYSTEM 616.01 Description. This work includes installing a sprinkler systems such as piping, sprinkler heads, valves, automatic controllers, remote control valves, booster pumps, valve assembly units, power and control wiring, pullboxes, and related equipment and materials at locations shown in the contract or as specified by the Engineer. 616.02 Materials. Materials shall conform to the following: Trench Backfill Material 703.21 Polyvinyl Chloride (PVC) Pipe 706.13 Dark Green Enamel Paint 708.03 Pullboxes 712.06(B) Frames and Covers 712.07(A) Sprinkler Heads 712.12 Valves 712.13 Pressure Regulators 712.14 Backflow Preventers 712.15 Precast Concrete Meter and Valve Boxes and Covers 712.23 Cables, Conductors and Wires for Irrigation System 712.34(C) Automatic Controller 712.42(A) Pump, Motor and Motor Controller 712.43 Springs for Sprinkler Risers 712.47 Electrical Appurtenances 712.48 Valve Boxes and Covers (Plastic and Concrete) 712.49 Switching Tensiometer 712.50 Rain Sensor Switch 712.52 Cullet Materials for Drainage System 717.04 Materials and equipment incorporated in the irrigation system shall be new and shall be of recognized standard quality. The Engineer will inspect and test the materials according to the contract. Electrical equipment shall conform to the NEMA Standards. Electrical work shall conform to the National Electrical Code (the Code), General Order No. 6 of the Hawaii Public Utilities Agreement, local power company rules, and local ordinances that may apply. Sprinkler water lines under the roadway shall be PVC pipe, Schedule 80 with threaded connections. Concrete for reaction blocks, pump foundations and jackets shall be Class B conforming to Section 601  Structural Concrete. Within 10 days following the award of contract, submit a list of the irrigation equipment that the C