11kW直流电动机不可逆调速系统..docVIP

1.1kW直流电动机不 可逆调速系统 作者姓名： 专业名称：电气工程及其自动化 指导老师： 摘要 随着电力电子器件、计算机技术和控制理论的迅速发展，电气传动自动化技术已广泛应用于各个工程领域。目前，功率集成电路已将主电路器件、控制驱动、保护等集成一体，为电气传动自动控制系统机电一体化开辟了广阔的前景。 本设计为直流不可逆调速系统的设计，本设计选用单相整流电路。设计系统调速不可逆，可选用单相桥式半控整流电路供电。对于小功率直流调速系统一般均采用减压调速方案，磁通不变，因此励磁绕组可采用单相不控整流电路供电。为保证先加励磁电源，后加电枢电压的原则，以及防止运行过程中因励磁消失而造成转速过高的现象，在励磁回路中应有弱磁保护环节。可以得出直流电动机具有良好的调速能力。 该设计经过老师的指导，学习到了直流调速系统的具体设计方案和直流调速系统的一些优点。 关键词 :直流电动机 整流电路 直流不可逆调速系统 Abstract With the power electronic devices, computer technology and the rapid development of control theory, electrical transmission automation technology has been widely used in various engineering fields. At present, the power integrated circuit devices has been the main circuit to control the drive, one integrated protection, automatic control system for an electrical transmission mechatronics has opened up broad prospects.  The design for the DC speed control system is not reversible design, as a result of the design of small power motors, the selection of single single-phase rectifier circuit. Because the system is not reversible, so the use of single-phase half-controlled bridge rectifier circuit power supply. DC converter for low-power systems are generally used decompression speed program, the same flux, so excitation windings can be controlled single-phase rectifier power supply is not. To ensure the first increase in excitation power, after the principles of the armature voltage, as well as to prevent the operation of the process of excitation due to excessive speed caused the disappearance of the phenomenon, in the excitation of magnetic circuit should be the protection of the weak links. DC motor can be drawn governor has a good capacity. After the design is the guiding teacher, learning to the specific DC speed control system design and DC speed control system of a number of advantages. Keywords: DC Motor，Rectifier circuit，DC non-reversible speed control system 目录 摘要