年处理25万吨苯的列管式换热器设计..docVIP

课 程 设 计 说 明 书 武 汉 工 程 大 学 化工与制药学院 课程设计说明书 课题名称 年处理25万吨苯的列管式换热器设计 专业班级 学生学号 学生姓名 学生成绩 指导教师 课题工作时间 武汉工程大学化工与制药学院 摘 要 我们先在老师的指导下统一选取了自己的课题，经过仔细考虑后选择了年处理25万吨苯的列管式换热器设计 Abstract Lets unity under the guidance of the teacher to choose your own topic, after careful consideration chose processing 250000 tons of benzene shell and tube heat exchanger design, design first, benzene the inlet temperature of 70, 30, the outlet temperature of the circulating water inlet temperature of 20, the outlet temperature of 25, and then the design and calculation of heat exchanger, after the teams work together to determine the process parameters and the structure of equipment index, and repeated calculation. The design of the shell and tube heat exchanger, first to determine the design scheme, choosing the appropriate calculation steps.Chad calculation used in a variety of data, the heat transfer coefficient of the heat exchanger heat transfer area of process structure size and so on to conduct accounting, with the target to design control whether can meet the requirements, ultimately determine the structure of the heat exchanger size to be prepared for the design drawings and reference, to complete the course design. Key words : ?heat exchanger ; Principles of chemical engineering ; structures  目 录 摘要..............................................................Ⅰ Abstract..........................................................Ⅱ 第一章、设计方案的确定 3 第二章、列管式换热器形式及特点的简述 3 2.1换热器概述 3 2.2.表面式换热器 4 2.3.管式换热器 4 2.4.套管式换热器 4 2.5.板式换热器 4 2.5.1.固定管板式： 5 2.5.2.浮头式换热器： 6 2.5.3.U型管式换热器 6 2.5.4.填料函式换热器 7 第三章、设备工艺流程图 7 第四章、论述列管式换热器形式的选择及流体流动空间的选择 7 4.1换热器形式的选择 7 4.2流体流动空间的选择 8 4.2.1宜于通