cn-AS3600-2001混凝土结构..doc

Australian StandardTM 澳大利亚标准TM Concrete structures 混凝土结构 This Australian Standard was prepared by Committee BD-002, Concrete Structures. It was approved on behalf of the Council of Standards Australia on 11 April 2001. This Standard was published on 5 June 2001. 本澳大利亚标准由BD-002 混凝土结构委员会编制。并由该委员会代表澳大利亚标准委员会于2001年4月11日批准，于2001年6月5日出版。 The following are represented on Committee BD-002: BD-002委员会由以下单位参加： AUSTROADS 澳大利亚和新西兰交通运输管理协会 Australian Building Codes Board 澳大利亚建筑规范司 Australian Pre-Mixed Concrete Association 澳大利亚预拌混凝土协会 Bureau of Steel Manufacturers of Australia 澳大利亚钢铁制造商局 Cement Concrete Association of Australia 澳大利亚水泥和混凝土协会 Concrete Institute of Australia 澳大利亚混凝土学会 Curtin University of Technology 科廷理工大学 Institution of Engineers Australia 澳大利亚工程师协会 Master Builders Australia 澳大利亚房屋建筑专家 National Precast Concrete Association Australia 澳大利亚国际预制混凝土协会 Steel Reinforcement Institute of Australia 澳大利亚钢筋学会 The Association of Consulting Engineers Australia 澳大利亚咨询工程师协会 The University of Adelaide 阿德莱德大学The University of Melbourne 墨尔本大学 The University of New South Wales 新南威尔士大学 The University of Western Sydney 西悉尼大学 Keeping Standards up-to-date 标准的更新 Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. 标准是应适时更新的文件体系，反映人们在科学、技术及系统方面取得的进步。为了保持标准的版本最新，所有标准都得定期进行评审并出版新的版本。在刊印不同版本期间，可能还会发行标准的修正内容。标准也可能会被取消。因此，读者使用的版本必须是最新版本，其中应包括在购买标准以来出版的所有修正版本的内容。Detailed information about Standards can be found by visiting the Standards Web Shop at .au and looking up the relevant Standard in the on-line catalogue. 有关澳大利亚标准的详细信息可以访问“澳大利亚标准”的网站.au，并查阅在线目录里的相关标准。Alternatively, the printed Cata