新）Sounds(virtools BB模块汉语翻译及用法详解).docVIP

Sounds CD PlayerVersion 1.00 - VirtoolsCategorized in Sounds/Audio CD Description Apply to a BEOBJECT.Plays soundtracks from an audio CD (v2). CD Player.cmoTechnical Information Play: starts the CD Player.Stop: stops the CD Player.Pause/Resume: pauses or resumes playback.First track: number of the first track to be played.Last track: number of the last track to be played.Starting Time: time on the first track when playback should start.Ending Time: time before the end of the last track when playback should end.The first track of a CD is numbered 1, and not 0 (zero).To play track 1, from beginning to end, the parameters would be as follows:First Track = 1Last Track = 1Starting Time = 0Ending Time = 0 声音 CD播放器在Sounds/Audio CD中将其分类 描述适用于交互对象从一个音频CD中播放声道上的音乐 CD Player.cmo 技术信息 Play：启动CD播放器Stop：停止CD播放器 Pause/Resume：暂停或是重新开始录制 First track：第一个声道被播放的数量Last track：最后一个声道被播放的数量Starting Time：当录制开始时第一个声道的时间Ending Time：当录制结束时第一个声道的时间 CD中的第一个声道被编号为1，而不是0 播放声道1，从开始到结束，参数如下： First Track = 1Last Track = 1Starting Time = 0Ending Time = 0 Get Sound SpectrumVersion 1.00 - VirtoolsCategorized in Sounds/Processing Description Apply to a WAVESOUND.Performs sound spectrum analysis. Get Sound Spectrum.cmo Technical Information In: triggers the process.Out: is activated when the process is completed.Start Frequency: Start of the requested frequency range.End Frequency: End of the requested frequency range.Value: Average sound volume for frequency range.Band Count: The number of bands used to perform spectrum analysis.Use this behavior building block to perform frequency analysis on a digital sound. 获取声音波谱 在Sounds/Processing中将其分类 描述 适用于一个波形声音执行声音波谱分析Get Sound Spectrum.cmo 技术信息  In：触发该进程Out：当进程结束时被激活 Start Frequency：请求频繁的排被开启End Frequency：请求频繁的排被结束 Value：在频繁的行里平均的声音音量 Band Count：用来执行音谱分析的波的数量 使用这个行为模块来在一个数字声音上执行一个频繁的分析 Midi PlayerVersion 1.00 - VirtoolsCategorized in Sounds/Midi Description Apply to a MIDISOUND.Plays/Sto