履带式联合收割机过桥设计与建模研究解析.docVIP

河 北 工 业 大 学 毕业设计说明书(论文) 作 者： 岳明辉 学 号： 100281 学 院： 机械工程学院 系(专业)： 车辆工程 题 目： 履带式联合收割机过桥的设计及建模研究 指导者： 王金刚 教授 (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2014 年 6 月 6 日 毕业设计（论文）中文摘要 履带式联合收割机过桥设计及建模研究 履带式联合收割机过桥的作用是将割刀割下的水稻引入脱粒机构进行脱粒。作为一衔接的机构，该机构设计的好坏直接影响到与收割机构的配合问题从而影响作物的产量，要做到收割的谷物能够绝大多数的通过过桥进入脱粒机，减少这一过程的不必要的损失，所有对于过桥的研究势在必行。 根据本次设计的参数要求以及实际运用所考虑的情况。应根据受力要求和运动要求计算出个零部件及总成的数值，并在此基础上完成完成过桥的总成、侧壁、以及箱体等的二维图纸的设计。同时还要以二维图为基础完成总成装备配图、链轮、带轮、过桥滚筒总成等的三维建模，从而成功地完成了这次对过桥的从计算设计到三维建模的全过程研究。 关键字 履带式联合收割机 过桥 设计 建模 毕业设计（论文）外文摘要 Title Design and Modeling crawler Combine bridge Abstract Crawler Combine the bridge is the role of introducing cutting knife under rice threshing threshing institutions. As a convergence mechanism which is designed to have a direct impact on the co-ordination with the harvesting sector thus affecting crop production, in order to harvest the grain through the bridge into the vast majority of the thresher, reducing the process unnecessary losses, all the research bridge imperative. According to the present design of the parameters required and the practical application under consideration. Force should be calculated according to the requirements and movement requirements numerical months parts and assemblies, and complete the two-dimensional drawings of the design is completed the bridge assembly, sidewall, and housing etc. on this basis. But also the basis of a two-dimensional picture shows the completed assembly of three-dimensional modeling equipped with maps, sprockets, pulleys, roller bridge assembly, etc., thereby successfully completed the bridge from the calculation of three-dimensional design to construction the whole process simulation study. Keyword: Crawler Combine bridge design