学士学位论文—基于单片机和gprs网络的家庭防盗报警设计物理与电信工程.docVIP

题 目 基于GPRS网络的家庭防盗报警设计 学生姓名 xxx 学号 xxx 所在学院 物理与电信工程学院 专业班级 指导教师 xxx 完成地点 物理与电信工程学院实验室 2016 年 6 月 5 日  基于GPRS网络的家庭防盗报警设计 [摘要] 为了解决当前防盗系统存在的诸如可靠性较差、易破坏，易误报、漏报、处理时间延后、布线繁琐等问题，本文给出了以AT89S51实现基于GPRS网络的家庭防盗报警设计方案。整个系统由监测、通信网络监测组成。终端由控制模块，通信模块，数据采集模块，信号处理组成。经过单片机串口送到GPRS模块发射，经GPRS通信网络  Design of Home anti-theft and Alarm System Based on Single Chip Microcomputer and GPRS Author:JiangYong (Grade 12,Class 03,Major in Electronics Information engineering ,Physics Telecommunications engineering Dept., Shaanxi University of Technology, Hanzhong 723000,Shaanxi) Tutor: Jia Jian Ke Abstract: In order to solve the current anti-theft system issues, such as poor reliability, easy to damage ,false positives, false negatives, processing time dalay, cumber some wiring and so on, this paper presents the 89S51 to realize the home anti-theft and alarm system based on single chip microcomputer and GPRS design scheme. The home anti-theft and alarm system are composed of home monitoring, communication network and the remote user monitoring. Home monitoring has control module, wireless communication module, data acquisition module, signal processing unit. The work process of the home anti-theft and alarm system: The infrared sensor recive singal of somebody invade, then send the information to control site and handle it, and GPRS module transmit through the single chip serial port. Finally the GPRS communication network in the form of SMS send to user’s mobile, realize household security alarm. It make sure from the experiment results that the hardwarereachs design requirements. Key Words： AT89S51;GPRS network； 目 录 1 引言 1 1.1 立题的目的及意义 1 1.2 国内外的研究现状及发展趋势 1 1