机械专业外文翻译(中英文翻译)..doc

JOURNAL OF COAL SCIENCEENGINEERING (CHINA) ISSN 1006-9097 pp 83-87 Vo1.10 No.l June 200.1 Development of belt conveyor driving system FU Jun-qing(付峻青)，WANG Cong(王聪)，HUO Wei(霍伟) (Department of Information and Electrical Engineering, China University of MiningTechnology IBei,jing) Beijing 100083, China) Abstract A short review for the existing various driving methods for belt conveyor was given, which include the analysis and comparison about the advantages, disadvantages and suitable application range of these methods. Based on this the variable-frequency-control(VFC} method for belt conveyor drive was fully discussed with focus on its application in medium-high voltage range. The principle of Neutral Point Clamped (NPC) Three一Level Inverter using high-voltage IGBTs together with the control strategy of rotor field-oriented vector control for induction motor drive were illustrated. Key words belt conveyor driving system, variable-frequency-control, three-level inverter Among the methods of material conveying employed，belt conveyors play a very important part in the reliable carrying of material over long distances at competitive cost．Conveyor systems have become larger and more complex and drive systems have also been going through a process of evolution and will continue to do so．Nowadays，bigger belts require more power and have brought the need for larger individual drives as well as multiple drives such as 3 drives of 750 kW for one belt(this is the case for the conveyor drives in Chengzhuang Mine)．The ability to control drive acceleration torque is critical to belt conveyors’ performance．An efficient drive system should be able to provide smooth，soft starts while maintaining belt tensions within the specified safe limits．For load sharing on multiple drives．torque and speed control are also important considerations in the drive system’s design. Due to the advances in conveyor drive control techno