PSIM的用法.docVIP

1.When simulating a motor drive system, use the mechanical-electrical interface block (under Elements - Power - Mechanical Loads and Sensors) to connect your own machine/load models to the built-in machine/load models in PSIM. 2.To add the commonly used subcircuits（分支电路） to Elements menu, place them in a folder （文件夹）called User Defined under the PSIM folder. 3.You could also create subfolders（子文件夹） in the User Defined folder, and they will appear as submenus. 4.Use the SimCoupler Module（模块） to run co-simulation（协同仿真） between PSIM and Matlab/Simulink. 5.Part of a system can be implemented（执行，应用） and simulated in PSIM and the rest in Matlab/Simulink. 6.When copying the PSIM schematic（原理图） to a word processor（文字处理器） (such as Microsoft Word), for better quality, choose the metafile（元文件）format. Select the schematic, choose Edit - Copy to clipboard （剪切板）- Metafile format. 7.When moving an element, hold down（控制） the shift button to enable the rubber band feature（橡皮带一样的特性）. 8.When rubber band is enabled, elements stay connected to the rest of the circuit while being moved. 9.To run the simulation in the free run mode, in Simulation Control (that has the image of a clock), check the Free run checkbox. 10.PsimBook Exercises are now available. PsimBook is an electronic book with interactive simulation（交互仿真） capability. A PsimBook document can include text, equations, graphs, text boxes where text can be entered and saved, and electrical and control circuits which are fully interactive and can be simulated by PSIM, all in one integral environment. To display node（节点） voltages in the free-run simulation, connect scopes (under Elements - Other - Probes) to the nodes. To convert a s-domain transfer function to a z-domain transfer function, use the s2z converter (under Utilities - s2z Converter). To display the current of a RLC branch or switch device in the free-run simulation, right click on the element, and from the menu, choose Current Scopes（电流范围）. To calculate the los