本科毕业设计_浮头式换热器.docVIP

PAGE PAGE I 浮头式换热器的设计 摘 要 本设计说明书是关于浮头式换热器的设计，主要是进行了换热器的工艺计算、换热器的结构和强度设计。 换热器是化工、炼油、动力、食品、轻工、原子能、制药、机械及其它许多工业部门广泛使用的一种通用设备。近二三十年来，化工、石油、轻工等过程工业得到了迅猛发展。因此，要求提供尺寸小，重量轻、换热能力大的换热设备。在设计过程中，我尽量采用较新的国家标准，做到既满足设计要求，又使结构优化，降低成本，以提高经济效益为主，力争使产品符合生产实际需要，适合市场激烈的竞争。同时为了使本次设计能够进行顺利，我在设计前参阅了许多有关书籍和英文文献，并做了一定量的外文翻译工作。 设计的前半部分主要是对换热器的原理、结构进行的详细的描述，从而进行换热器的选型，结构设计分析。设计的后半部分则是关于结构和强度的设计，主要是根据已经选定的换热器型式进行设备内各零部件的设计，如管板、折流板、定距管、钩圈、管箱等。包括：设计计算、材料的选择、具体尺寸确定、确定具体位置、管板厚度的计算、浮头盖和浮头法兰厚度的计算、开孔补强计算等。最后绘制一张装配图，三张零部件图。 关键词：浮头式换热器；设计；校核； Floating Head Heat Exchanger Design Abstract This design manual is about the floating head heat exchanger design, mainly for the heat exchanger process calculation, heat exchanger design of the structure and strength. Heat exchanger is the chemical, oil refining, power, food, light industry, atomic energy, pharmaceutical, machinery, and other widely used in many industrial sectors as a general-purpose device. The past 23 years, chemical, petroleum, light industry and other process industries have been developing rapidly. Therefore, the required small size, light weight, large capacity heat exchanger heat transfer equipment. In the design process, I try to use a relatively new national standard, so not only meet the design requirements, but also to structural optimization, cost reduction, mainly to improve economic efficiency, and strive to make the products meet the actual needs of production for the market competition. Meanwhile, in order to make this design smoothly carried out, I read a lot before in the design of the books and English literature, and to do a certain amount of foreign language translation work The first part of the design is mainly the principle of heat exchanger, a detailed description of the structure, which for heat exchanger selection, structure design. The latter part is about the design of the structure and strength of the special heat exchanger, which is mainly to design the parts, such as tube-sheet, baffle plate, distance