第一章_-_光纤交换机硬件概述.pptVIP

* The FR4-18i blade provides the following features: 16 Fibre Channel ports (based on the Condor ASIC) that support the Fibre Channel Routing Services 2 GbE ports supporting the FCIP and Fibre Channel Routing Services with link speeds up to 1 Gbit/sec: Each GbE port can support up to 8 FCIP tunnels. Each FCIP tunnel is represented and managed as a virtual Fibre Channel E_Port (VE_Port). Each FCIP tunnel can support data compression and traffic shaping, with a committed bandwidth. Fibre Channel Routing Services can be used over each FCIP tunnel (VEX_Ports). You can learn more about the Brocade FR4-18i Blade by viewing the AFS175 web-based training class from Brocade. Footnote 1: Up to 8 FR4-18i blades can be installed in a 48000 or DCX if they are used only for FC Fastwrite or FCIP without routing. * The FC4-16IP blade provides a director based iSCSI gateway from the Fibre Channel SAN to iSCSI initiators. Both of the intelligent blades (FR4-18i and FC4-16IP) require 4 power supplies. The slots that contain these intelligent blades will not power on if there are not 4 power supplies. * Footnote 1: The DCX each slot can handle 32 x 8 Gbits/sec in both directions and still be fully subscribed; where as the 48000 can only handle up to 16 x 4 Gbit/sec in both directions and still be fully subscribed. So the DCX has 4 times the bandwidth per slot then the 48000. Footnote 2: 384 user ports plus 64 ICL (ISL) ports for a total of 448 ports. * * The Brocade 7500 is designed for stacked deployments A Stand-alone Solution for Enterprise and Mid-Range 16 port Fibre Channel Switch/Router 2 port Fibre Channel over IP Distance Extension 16 Front Panel 1, 2, or 4 Gbit/sec FC ports Fibre Channel Routing Services for all ports including load balancing and long distance support 16 – 4 Gbit/sec Internal Fibre Channel Router 2 Front Panel 1 Gbit/sec APs Ethernet Ports Compression Hardware Assist IPSEC Hardware Assist 8 FCIP tunnels per Port Each FCIP Tunnel is represented and manage