《精》胶印设备的传墨机理及其关键部件运动仿真.doc

摘 要 本论文的内容包括两个方面，胶印设备的传墨机理和传墨机构关键部件运动仿真。主要根据平版胶印机的印刷结构和原理对传墨系统进行了理论上的分析研究，并且运用proe软件对传墨系统的关键部件进行了运动仿真设计。在传墨机理这一部分主要阐述了输墨系统的组成和调节、相关系数的关系和参数化模型的建立，并对油墨在墨辊间的传输与转移过程作出了仔细的分析，用简单明了的示意图清楚表达了该过程，同时对输墨装置各部分墨辊及其接触压力的调节作出具体的分析；运动仿真这部分主要运用proe软件对传墨系统的供墨机构、匀墨机构和着墨机构进行了设计绘制，并通过建立各机构之间的连接关系实现了基本的运动仿真，最后在对整个的传墨过程中墨辊的空间排列和传动进行了仿真，基本接近实际情况。本次设计主要是借助先进的三维机械仿真软件，通过对胶印机传墨系统关键部件进行逆向绘图，然后根据胶印机的基本运动过程和传墨原理绘制出近似的传墨机构，最终通过proe强大的仿真模块模拟了胶印机的传墨机构运动和传墨过程，更直观的表达了胶印设备的传墨过程，更形象的反映了输墨系统的传墨机理。 关键词： 传墨机理；运动仿真；输墨系统；墨辊；传墨机构；参数化模型Abstract This paper covers two aspects, the traditional offset equipment mechanism and Mexican-Mexican institutions key components motion simulation. Offset lithography primarily in the printing structure and principles of traditional Mexican system of theoretical analysis, proe software and the use of traditional Mexican system of the key components of the simulation design. Chuan mechanism in this part of Mexico mainly expounded Inking system and the regulation, The correlation coefficients and parameters of the model, Ink in Mexico as well as the transfer roller and the transfer process of careful analysis, straightforward with clear diagram of the process. Inking the same time part of the device and its ink roller contact pressure regulation specific analysis; This motion simulation using some of the major right-proe software system for the Mexican Mexican institutions, Mexican agencies and absorbed in your body for the design drawing, and through the establishment of the link between the basic realization of the movement simulation, Finally in the entire process of Mexican-Mexican roll with the space and drive the simulation, close to the actual situation. The design was mainly assisted by advanced 3D mechanical simulation software. Offset by the Mexican system-critical components in reverse mapping, According Offset the basic movement principles and traditional Mexican approximate map out the traditional Mexican institutions, finally passed proe powerful simulation