基于TM1639的数码管驱动电路.docxVIP

基于TM1639的数码管驱动电路TM1639是一种带键盘扫描接口的LED（发光二极管显示器）驱动控制专用IC,内部集成有MCU数字接口、数据锁存器、LED驱动、键盘扫描等电路。本产品质量可靠、稳定性好、抗干扰能力强。主要适用于家电设备(智能热水器、微波炉、洗衣机、空调、电磁炉)、机顶盒、电子称、智能电表等数码管或LED显示设备.TM1639最大的有点简单好用，硬件电路简单，不需要限流电阻，亮度软件可调，芯片内部自带扫描电路，只需要将要显示的内容写入寄存器，即可稳定显示，非常方面。驱动代码如下：TM1639.c文件#include TM1639.hcode unsigned char dofly[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07, 0x7f,0x6f,0x77,0x7C,0x58,0x5E,0x79,0x71};sbit TM_STB1=P3^6;sbit TM_STB2=P1^4;sbit TM_STB3=P1^3;sbit TM_SCLK=P2^0;sbit TM_DIO =P2^1;void TM_start(unsigned char chip) //开始条件{if(chip==0){TM_STB1=0;}else if(chip==1){TM_STB2=0;}else if(chip==2){TM_STB3=0;}TM_SCLK=1;_nop_();_nop_();}void TM_stop(unsigned char chip) //结束条件{if(chip==0){TM_STB1=1;}else if(chip==1){TM_STB2=1;}else if(chip==2){TM_STB3=1;}TM_SCLK=1;_nop_();_nop_();}void TM_send_data(unsigned char x) //送数据低位先传{unsigned char i;for(i=0;i8;i++){TM_SCLK=0;TM_DIO=(bit)(x0x01);_nop_();_nop_();TM_SCLK=1;_nop_();_nop_();x=1;}}void TM_control(unsigned char cmd,unsigned char chip){TM_start(chip);TM_send_data(cmd); TM_stop(chip);}void TM_display(unsigned int* time,unsigned long mode){unsigned char i,j;unsigned char temp[24];unsigned int temptime[6];for(i=0;i6;i++){temptime[i]=time[i];for(j=0;j4;j++){if((mode(i*4+3-j))0x01 != 0){temp[i*4+3-j]=dofly[temptime[i]%10];}else{temp[i*4+3-j]=0x00;}temptime[i]/=10;}}for(i=0;i3;i++){TM_control(CMD_AUTO_ADDR,i);//自动地址TM_start(i);TM_send_data(CMD_START_ADDR); //起始地址for(j=0;j8;j++){if(j==2 || j==6){//固定位置显示小数点TM_send_data((temp[i*8+j]|0x80)0x0F);TM_send_data((temp[i*8+j]|0x80)4);}else{TM_send_data(temp[i*8+j]0x0F);TM_send_data(temp[i*8+j]4);}}TM_stop(i);TM_control(LEVEL_1,i);}}TM1620.h文件#includeSTC12C5A.h#ifndef __TM1639_H__#define __TM1639_H__#define DIG0 0xc0#define DIG1 0xc2#define DIG2 0xc4#define DIG3 0xc6#define DIG4 0xc8#define DIG5 0xca#define DIG6 0xcc#define DIG7 0xce//亮度等级#define LEVEL_OFF 0x80#define LEVEL_1 0x88#define LEVEL_2 0x89#define LEVEL_4 0x8a#define LEVEL_10 0x8b#define LEVEL_11 0x8c#define LEVEL_12 0x8