本科毕设论文-基于UG的阀盖压铸模设计.docVIP

摘要 基于UG的阀盖压铸模设计 为了了解压铸模具的结构框架及其工作原理，所以选择了设计一个阀盖的压铸模具为切入点，并运用UG软件作为完成设计的平台。在了解了模具的结构工艺后，在UG的平台上完成了其结构设计及虚拟装配。在完成三维造型设计的同时也较深入的了解的压铸模的工作原理，现将一些设计过程记录在论文里。 关键字：阀盖 压铸模具 UG 结构工艺 结构设计  Abstract The cover die-casting die design based on UG In order to understand the structural framework and working principle of die casting mould, so chose to design a cover of die casting mould as the breakthrough point, and using the UG software as a complete design platform.After knowing the structure of the mold process, in the platform of UG completed its structure design and virtual assembl