ppt课件-powerpointpresentation-smallenginedisassembly.pptVIP

Step 23: Replace Blower Housing Note: Linkage plate flange mounts with the blower housing top. Weave the blower housing over, under, and over. Step 24: Replace Muffler Note: Include gasket. #30 star tool required. Replace muffler guard. One bolt at rear of muffler and four screws at front. Step 25: Replace Fuel Tank Note: Replace fuel line. Four bolts front and back. Step 26: Replace Throttle Fuel Valve Cover Plate Note: Fuel valve must be in off position. Throttle must be at half. Step 27: Replace Air Cleaner Mounting Plate Gasket Filter Cover Steps 28-29: Fill Crankcase with clean o