ppt课件-reflexklystron-robostech.pptVIP

* * Conventional Tubes Conventional Device tubes cannot be used for frequencies above 100MHz 1. Interelectrode capacitance 2. Lead Inductance effect 3. Transit time effect 4. Gain Bandwidth limitation 5. Effect of RF losses (Conductance, dielectric) 6. Effect due to radiation losses Efficient Microwave tubes usually operate on the theory of electron velocity modulation concept The electron transit time is used in the conversion of dc power to RF power Linear Beam O tubes The paramount O – type tube is the two cavity klystron followed by the reflex klystron. Slow wave structures