ppt课件-qualitycontrolasapartfromqualityassuranceradiology.pptVIP

Prepared by :FDR Prepared by :FDR * Quality Control Rad T 110 * Aim : The purpose of QC to achieve high quality images with the least amount of radiation. Quality Control is a part of Quality Assurance program * Test Types: Acceptance test Monitoring test Annual Test After repair or tube replacement * Acceptance Test: Performed upon newly installed equipment to verify purchase specification and to establish performance base line. Frequency: To be performed once only when new machine is installed * Monitoring Test: Performed for vital parameter on routine basis. Frequency: Every 2-3 mont