汽车底盘设计的工艺流程步骤总结.ppt

Car chassis?process planning?processes汽车底盘工艺规划的流程 应聘人：张 慧 日 期：2013年7月9日 在总装工艺中，底盘工艺设计相对于电器和内外饰来说，刚性强，多品种车型的通用性差，每更新换代一种车型，均需要更新车间大量专用设备和生产工艺。底盘工艺设计可以称得上是总装生产线的“灵魂”，涉及的专业知识较多，如机械化、电控、非标设备、抱具结构等，决定着生产线的工艺设备种类和数量、物流工位器具形式等。因此，底盘工艺设计在总装生产线的开发中占有举足轻重的地位，是产生高性价比总装生产线的关键。 The first step: Chassis prerequisite for process design第一步：底盘工艺设计的前提条件 1.1产品资料 The first step: Chassis prerequisite for process design第一步：底盘工艺设计的前提条件 2.1 plant design parameters Step Two:?Process Analysis第二步：工艺分析 Step Two:?Process Analysis第二步：工艺分析 2.1.2 SE analysis Step Two:?Process Analysis第二步：工艺分析 Step Two:?Process Analysis第二步：工艺分析 Step Two:?Process Analysis第二步：工艺分析 The third step: the advance of process planning第三步：工艺规划的推进 Fourth step: verification phase第四步：验证阶段 * * 综述 In the assembly process, the chassis relative to the electrical and process design for interior and exterior, rigid, multi-species models of the general poor, one model for each replacement, all you need to update a large workshop equipment and production processes. Process design chassis assembly line can be called a soul, involving the expertise of more, such as mechanization, electronic control, non-standard equipment, hold a structure, determine the production line process equipment types and quantities, logistics station form such appliances. Therefore, the chassis assembly line process design in the development occupies a pivotal position, is to produce cost-effective assembly line key. 将所有数模装配在一起就构成了一个整车数模，从数模中可以获得零部件的结构尺寸、位置关系。由数模还可以生成整车、分总成，因此工艺设计计过程中，首先要输入数字模型。 1.1 Product information Assembled together all the digital-analog constitute a vehicle modulus, modulus can be obtained from several parts of the structure, size, position relationship. Can also be generated by a digital-analog vehicle, sub-assembly, thus taking into account technological design process, we must first enter the digital model. Plant design parameters include the following