基于ZigBee的烟雾温度传感系统设计[精选].docVIP

毕业设计 题 目 基于ZigBee的烟雾温度传感系统设计 学 院 自动化与电气工程学院 专 业 自动化 班 级 仪器0901 学 生 5645136 学 号 49 指导教师 王中华 二〇一三年六月八日摘 要 无线传感技术如雨后春笋般日益成熟，其具有成本低、能耗小、无需布线、相互之间没有电气干扰等优点，极大的迎合了公众的节能，使用方便的需求心理。本文设计了一种基于ZigBee技术的烟雾温度传感系统，主要有两部分组成：数据采集系统（无线终端下位机）和数据接收系统（上位机），上位机和下位机呈现一对多的关系。采用CC2430模块通过ZigBee协议实现上位机和下位机数据的无线收发功能。本文根据课题设计任务的要求，完成了烟雾传感器、温度传感器、液晶显示、射频收发模块的选型，设计了由电源模块、传感器模块、数据无线传输模块、串口模块等构成系统的相关电路，制定了数据无线传输通讯协议，编制了相关程序，并进行了相关的实验调试。此无线传感系统性价比较高，适应能力强，复杂度低，极大的提高系统可靠性、灵活性和检测范围，降低系统的成本，具有较好的应用前景。 关键词：ZigBee；无线传感系统；下位机；射频收发模块；通讯协议 ABSTRACT Wireless sensing technology have sprung up day by day mature. It has low cost, low energy consumption, no wiring, and the advantages of no electrical interference between each other, catering to the energy saving of the public, convenient to use the psychological demand. This paper designed a kind of smoke temperature sensing system based on ZigBee technology. There are two major parts: the data acquisition system (wireless terminals under a machine) and data receiving system (PC). Upper machine and lower machine presents a one-to-many relationship. Using CC2430 module through the ZigBee protocol implementation of upper machine and lower machine data radio transceiver functions. In this paper, according to the requirements of project design, completed the smoke sensor, temperature sensor, LCD display, rf transceiver module selection, design including power supply module, sensor module, wireless data transmission module, serial port module composition system such as the relevant circuit, established data wireless communication protocol, compiled the relevant procedures, and has carried on the related experimental debugging. The wireless sensor system, high cost performance, strong adaptability, low complexity, greatly increase the system reliabi