嵌入式系统的原理及应用教程第5章.ppt

5.5.4 定时部件应用实例 void * func_rtc_test[][2]= { (void *)Test_Rtc_Alarm, RTC Alarm, (void *)Display_Rtc, RTC Display , (void *)Test_Rtc_Tick, RTC Tick , 0,0 }; void Rtc_Test(void)//RTC测试 { int i; Uart_Printf(\n*********RTC Test program start *********\n); while(1) { i=0; Uart_Printf(\n\n);//回车两行 while(1) { //显示菜单 Uart_Printf(%2d:%s,i,func_rtc_test[i][1]); 　　　　　　i++; 5.5.4 定时部件应用实例 if((int)(func_rtc_test[i][0])==0) 　　　　　{ Uart_Printf(\n); 　　break; 　　　　　} if((i%4)==0) Uart_Printf(\n); 　　　　} Uart_Printf(\nPress Enter key to exit : ); i = Uart_GetIntNum(); if(i==-1) break; // return. if(i=0 (i((sizeof(func_rtc_test)-1)/8)) ) // select and execute... ( (void (*)(void)) (func_rtc_test[i][0]) )(); } Uart_Printf(\n====== RTC Test program end ======\n); } 5.5.4 定时部件应用实例 //RTC时钟显示 void Display_Rtc(void) { int year,tmp,key; int month,date,weekday,hour,min,sec; Uart_Printf([ Display RTC Test ]\n); Uart_Printf(0. RTC Initialize 1. RTC Time Setting 2. Only RTC Display\n\n); Uart_Printf(Selet : ); key = Uart_GetIntNum(); Uart_Printf(\n\n); isInit = key; if(isInit == 0) { Rtc_Init(); isInit = 2; } 5.5.4 定时部件应用实例 else if(isInit == 1) { Rtc_TimeSet(); isInit = 2; } rRTCCON = 0x01; Uart_Printf(Press any key to exit.\n\n); while(!Uart_GetKey()) { while(1) { if(rBCDYEAR == 0x99) year = 0x1999; else year = 0x2000 + rBCDYEA