bma15的0.c解析.docVIP

一，Struct i2c_board_info :创建设备的模板,这个结构体用来创造一个i2c设备的信息列表。由i2c_register_board_info();注册。 struct i2c_board_info { char type[I2C_NAME_SIZE]; unsigned short flags; unsigned short addr; void *platform_data; struct dev_archdata *archdata; #ifdef CONFIG_OF struct device_node *of_node; #endif int irq; }; 解析： type：芯片的类型，用来初始化i2c_client.name. flags：用来初始化i2c_cllient.flags. addr:存储i2c_client.addr. platform_data：存储i2c_client.dev.platform_data archdata:拷贝到i2c_client.dev.archdata irq:保存i2c_client.irq. 二，Struct i2c_adapter 是一个用于物理i2c总线的结构体，包括算法 struct i2c_adapter { struct module *owner; unsigned int id; //algorithm的类型，以I2C_ALGO_开始 unsigned int class; /* classes to allow probing for */ const struct i2c_algorithm *algo; /* the algorithm to access the bus */ void *algo_data; //algorithm数据 /* data fields that are valid for all devices */ struct rt_mutex bus_lock; int timeout; /* in jiffies */ int retries; //重试次数 struct device dev; /* the adapter device */ int nr; char name[48]; //适配器的名字 struct completion dev_released;//用于同步 struct list_head userspace_clients; }; 三,struct i2c_client：表示一个i2c从设备。指定了一个单一的设备（比如一个芯片）连接到一个I2 c总线上。 struct i2c_client { unsigned short flags; /* div., see below */ unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ char name[I2C_NAME_SIZE]; struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /