Study_的on_Networked_Control_for_Power_Electronic_Systems.docVIP

Study on Networked Control for Power Electronic Systems Yao Zhang, Hao Ma, Fei Xu College of Electrical Engineering, Zhejiang University Hangzhou, P.R.China, 310027 Email: yaozhanghust@cee.zju.edu.cn, mahao@cee.zju.edu.cn, xufei@cee.zju.edu.cn  Abstract- This paper proposes a novel control strategy based on network for power electronics system. The definition of networked control is presented in control through network and control of network. According to the actual situation of power electronics, network selection and communication mechanism are presented. By means of the communication cell, standardized data stream of control loop and characteristics of network- induced delay through communication, some concepts of control through network is described. After the rough estimation of  Load or Controlled Plant Signal Sampling Feedback Generation and Departure Controlled Power Electronic Module  Output Signal from Controller Feedback Signal from Module Network  Sending Area Control Processor Acceptor Controller network-induced delay of all kinds of network during the transmission process for data of power electronics, the strategies of networked control for power electronic systems are presented (a) For single power electronic module by different MAC and topologies, which embody the essence of control of network. Index Terms- Power Electronic System, Networked Control, Power Electronic Module i  iL  uC  Load Power Electronic Module N Network-induced Delay, MAC (Medium Access Control) Control object control variable  I.  INTRODUCTION Other signal transmission  Performer  Sensing Traditional communication mode is short of global design switch drive element towards communication information sources. Therefore, more Network Time-delay Time-delay and more researches about advanced communication design for power electronic systems are developed [1-6], especially with the new trend of integration and modularization of pow