大学毕设论文--电器盖注射模具设计.docVIP

摘要 岁月的穿梭时间经受不起折磨，马上就要毕业了，为此正在忙的我们也是面临这大学的最后一个主要的任务，那就是毕业论文。而我的毕业设计就是电器盖注塑模具设计。在欢声笑语中，不得不认真对待自己的论文。注射模具结构是塑料模具设计的主线，它在我们的生活中也扮演了重要的角色，与我们的生活息息相关，同时也决定了模具开发的成本和制造及如何去正确的操作。 这次的毕业设计的模具型腔采用是整体式结构，很是方便塑件的加工，而且还是节约了生产资本；型芯和型腔把它们都加工然后再把它们配合在一块，这样才节省了很多材料，节省了很多时间，也节省了人力；定模板和定模座板让它们用螺钉一起配合。动模板和支承板，垫块，动模座板采用螺钉加销钉固定，保证了相对位置准确，提高了加工精度。推出机构采用推板推出，使推出阻力较小。推出机构用导柱与导套结合保证运动精度。采用侧浇口，这次毕业设计的电器盖设计的是同一个模具两种行腔的结构保证了模具运行。既节约了材料，又使利用率提高。 这次的毕业设计让我学到了好多的知识，体现了正在学习模具的功能打下了铺垫，这不但需要你以前学习的书本上的理论知识，俄日额还是需要你的操作的动手能力，你要会书本上的知识，而且还要学会一些绘图软件。而且在此期间，你也同时学会如何运用它们。当然还有老师们的帮助，没有老师的帮助做完毕业设计是相当苦难的，需要老师的指导，老师给你的指点之事还是需要你去分析，总之学之无涯。 关键词： 电器盖注塑模具； 型腔； 注射模Abstract Years of travel time to bear suffering, is going to graduate, is busy for this we are facing the last major task of the university of the graduation thesis. My graduation design is the electrical cover injection mold design. In the laughter, have to take seriously their own paper. Is the backbone of plastic mold design, injection mold structure it in our life also play an important role, is closely related to our life, it also determines the costs of mold development and manufacturing, and how to correct operation. This graduation design is a monolithic structure is used in mold cavity is very convenient for plastic parts processing, but also saves production capital; Core and cavity are processing them and then cooperate with them in a piece, so save a lot of material, save a lot of time, also saves the manpower; Set the template and the fixed mould plate let them use the screw together. Dynamic templates and bearing plate, block, mold base plate by using screws and taper pin, ensure the relative position accurately, improve the machining accuracy. Launch institutions use push board, make out smaller resistance. Launch institutions with motion guide pin and guide sleeve to ensure accuracy. Use the side gate, the graduation design of the electrical cover design is the same mold two improperness structure to ensure the mold run. Bo