LVBTrackerPCBVersion1.docVIP

LVB Tracker Update PCB v1.2, Firmware v0.7, Programmer v0.2 7 December 2004 General notes You have a choice between using the RS-232 interface, the FTDI USB interface or an XPORT Ethernet interface. The simplest way to get started is to use the RS-232 interface where the MAX-232 (U3) chip is installed, but there is nothing in the 24 pin DIL socket. To use the FTDI USB interface (U4) or the XPORT Ethernet interface, these devices are plugged into the 24 pin header and the MAX-232 (U3) must be removed. Only one interface may be used at once. The ICD connector (J2) is only required if you