大学毕设论文__流量为1500kgh四管程固定管板式换热器的设计.doc

摘要 换热器又被叫热量交换器，是一种把热流体的热量传递给冷流体的设备，并且实现化工生产过程中热量的交换和传递不可缺少的设备，在工厂中具有重要的意义。换热器可以是一种单独的设备，例如加热器、冷却器和凝汽器等等；也可是工艺设备的组成部分，比如石化、煤炭工业中的余热回收装置等等。换热器是两种温度不同的物料在一个设备内相互交换热量，最终达到将物料冷却，或者将冷物料加热为目的的设备。常见的热交换器是:浮头式换热器,固定管板式换热器,填料函式换热器、u型管换热器,线圈热交换器,单引号和双壳程换热器管式热交换器和管式热交换器和导流管式热交换器,折流栅换热器,热管换热器,换热器插管,滑动管板式换热器,等。本换热器是蒸汽冷凝器在成产中是非常常见的设备，该换热器有耐高压的优点、价格低廉、清洗方便不宜结垢的优点。 壳程的设计任务描述二甲胺的给定条件中,温度为49.96℃,0.9 MPa开始冷凝,其流量为1500kg/h。管内的介质是水,冷却水温上升从一开始的33℃到43℃,压力在0.6 MPa。完成了压降计算,强度计算,钢筋,短管箱部分壁厚计算、等强度设计,强度设计依据圆柱,头部和检查,根据入口连接的流量和出口喷嘴直径的选择上,打开加筋法的基础上平等面积配筋计算。法兰的设计,管板扩展,根据弹性支持假说的管板设计和检查,管板与换热管连接焊接、棒和管板螺纹连接结构。与此同时,鞍的卧式容器检查。 本设计充分利用材料,更多的场合。在同一换热器的热交换器是非常便宜和安全。因此,换热器在工厂中占有重要地位。 关键字: 固定管板; 换热器; 不同物料; 热交换 ； 补强 Abstract Heat exchanger called heat exchanger again, it is a kind of the thermal fluid heat transfer to cold fluid equipment, and realize the heat exchange and transmission in the process of chemical production indispensable equipment, has the vital significance in the factory. Heat exchanger can be a single device, such as a heater, cooler and steam condenser, etc. But also part of the process equipment, such as waste heat recovery unit in petrochemical industry, coal industry, and so on. Temperature heat exchanger are two different materials in a heat exchanging equipment, eventually achieve the material cooling, or heating equipment for the purpose of cold material. Common heat exchanger is: of floating head heat exchanger, fixed tube plate heat exchanger, stuffing box type heat exchanger, the u tube heat exchanger, heat exchanger coil, single and double shell side heat exchanger tube heat exchanger and tube heat exchanger and diversion tube heat exchanger, the rod baffle heat exchanger, heat pipe heat exchanger, heat exchanger, intubation sliding tube plate heat exchanger, etc. This heat exchanger is steam condenser is very common in into during equipment, the heat exchanger has the advantages of resistance to high pressure, low cost, convenient cleaning is unfavorable and