机电工程综合管线优化中BIM技术的应用..doc

机电工程综合管线优化中BIM技术的应用 许华春 庄国强 中国建筑股份有限公司厦门分公司 361006 【摘要】 在现代建筑的机电工程项目中，管道综合性要求越来越高，一般涉及给排水、消防、通风、空调、电气、智能化等多个专业，直接关系到整个工程的质量、工期、投资和预期效果，因此必须进行管线深化设计。如今，随着BIIM即建筑信息模型的发展和成熟，以三维技术在前期可以进行碰撞检查,优化设计,减少在建筑施工阶段可的损失和返工的,更加方便进行技术交底，从而达到管 【关键字】 机电工程；BIM技术；综合管线优化 A Brief Introduction to the Specific Application of BIM Technology in the Comprehensive Optimization of Electromechanical Engineering Pipelines Abstract: In modern electromechanical engineering projects, comprehensive requirements for pipelines are getting higher, generally involving water supply and drainage, fire control, ventilation, air conditioning, electric, intellectualization and so on, which is directly related to the whole project quality, project duration, investment and the desired effect, so detailed design for pipelines must be conducted. Nowadays, with the development and maturity of BIM，namely, Building Information Model, on the basis of 3D digital technology, pipeline equipment models of buildings can be simulated, and the pipeline equipments which are drawn in 2D technology would be integrated and visualized. At the early stage of the construction, BIM can help check pipeline collision, optimize the design of original drawings, improve the efficiency of reading drawings, and reduce the loss that can be avoided in the construction phase and the probability of rework, and it can also be more convenient for technical clarificaiton, thus the goal of pipeline comprehensive optimization layout can be achieved. Key Words: electromechanical engineering；BIM technology; the integrated optimization of the pipeline; 机电工程综合管线优化 1.1重要性 在现代化机电工程中，综合管线布置主要包括：给排水管道、消防喷淋管道、强弱电桥架以及风管管件的综合布置；而机电各专业的设计图纸正常是分专业，进行各系统的绘制，缺乏交流沟通，以及必要的协调合作，加上机电设备各个系统管线繁琐复杂，工程量较大，然后建筑物可利用的空间又有限，这就造成了现场施工中各个系统的冲撞，如果未能在项目前期对项目的管线进行综合优化，必将导致整个建筑物的净空高度，从而大大影响建筑物的观感和使用效果。因此，根据需要施工现场情况，通过相关的技术，对各专业管线设备在空间上的排列走向进行优化，提高净空高度，保证管线综合布置的可行性、美观性及实用性。 1.2必要性 综合管线合理布置，提高建筑物净空高度，减少二次施工的损失。 综合排布机房及楼层平面区域内机电各专业管线，协调机电与土建、精装修专业的施工冲突。 确定管线和预