某工业大学变电所电气部分设计(10KV变电所)..doc

某工业大学变电所电气部分设计(10KV变电所) 摘 要 本设计的题目为“某工业大学变电所电气部分设计”。首先进行主变压器的选择；电气主接线的选择依照主接线的特点，选择各个电压等级的接线方式，进行综合比较，选择最佳接线方式；之后进行短路电流的计算；根据短路电流计算进行电气设备的选择；对发电 ... P摘 要BR本设计的题目为“某工业大学变电所电气部分设计”。首先进行主变压器的选择；电气主接线的选择依照主接线的特点，选择各个电压等级的接线方式，进行综合比较，选择最佳接线方式；之后进行短路电流的计算；根据短路电流计算进行电气设备的选择；对发电机和变压器进行继电保护的设计；之后进行防雷保护；结合实际绘制设计图纸，包括平面图、剖面图、电气主接线图、继电保护图和防雷接地图等。BR工业大学变电所电气主接线的高压侧采用单母线接线，低压侧采用单母线分段的电气主接线形式；要根据负荷计算正确的对主变压器进行选择；短路计算部分包括短路的危害、短路点的选择及其具体数值计算；电气设备选择包括电气设备的分类，高压断路器、隔离开关、电流互感器和电压互感器的选择与校验；继电保护设计主要说明对继电保护的基本要求和原理以及对变压器进行电流速断保护和过电流保护的设计计算；配电装置部分说明其类型、应用和设计步骤，采用的是成套配电装置；防雷保护采用避雷针防直击雷保护。BR此次设计综合运用电气部分的知识对10KV变电所的设计进行了较为详细的说明，其中包括图表说明以及文字阐述，语言通俗易懂。 /P P关键词：变电所；电气主接线；短路计算；继电保护 /P PAbstractBRThe design was entitled “Liaoning University of Technology electrical substation part of the design.” First choice for the main transformer; main electric wiring of choice in accordance with the characteristics of the main cable, select the various levels of voltage wiring, integrated, choose the best connection mode; After a short-circuit current calculations, according to short-circuit current calculation of electrical equipment choice of generators and transformers for protection of the design; after the Lightning Protection in conjunction with the actual drawing design drawings, including floor plans, profiles, the main electric cable Plans, protection plans and mine access maps.BRLiaoning University of Technology electrical substation main connection of high-pressure side of the single-bus wiring, low-pressure side of the single-section of the bus main electric connection forms; calculated according to the load on the main transformer right to choose; calculated short-circuit some of the harm, including short-circuit, Short circuit, and the choice of specific numerical calculation; Electrical equipment options include the classification of electrical equipment, high-voltage circuit breakers, switches isolation, current transformers and voltage transformer and the choice of checking; rela