ppt课件-on relevanceof wire load models（在导线relevanceof负载模型）.pptVIP

Optimal Planning for Mesh-Based Power Distribution H. Chen, C.-K. Cheng, A. B. Kahng, Makoto Mori * and Q. Wang UCSD CSE Department * Fujitsu Limited Work partially supported by Cadence Design Systems, Inc., the California MICRO program, the MARCO Gigascale Silicon Research Center, NSFMIP-9987678 and the Semiconductor Research Corporation. Motivation (I) Voltage drop in the power distribution is critical to chip performance and reliability Power distribution network in early design stages nominal wiring pitch and width for each layer need to be locked in location and logic content of the bloc