- 1、本文档共156页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
大学毕业设计论文-张小楼0.9mta矿井设计
摘 要
本设计包括三个部分:一般部分、专题部分和翻译部分。
一般部分为张小楼t/a矿井设计。张小楼煤矿位于江苏徐州市西北面,交通便利。井田走向长约3.53km,倾向长约4.8km,井田总面积为16.94km2。主采煤层为7号煤、9号煤,平均倾角为20°,煤层平均总厚为5.0m。井田地质条件。
井田工业储量为11491.4万t,矿井可采储量8192.8万t。矿井服务年限为6a,涌水量不大,矿井正常涌水量为21m3/h,最大涌水量为30m3/h。矿井瓦斯涌出量较低,为低瓦斯矿井。
井田为立井水平开拓。大巷采用矿车运煤,辅助运输采用矿车运输。矿井通风方式中央边界式通风。
矿井年工作日为330d,工作制度为“三八”制。
一般部分共包括10章:1.矿区概述及井田地质特征;2.井田境界和储量;3.矿井工作制度及设计生产能力、服务年限;4.井田开拓;5.准备方式区巷道布置;6.采煤方法;7.井下运输;8.矿井提升;9.矿井通风与安全技术;10.矿井基本技术经济指标。
专题部分题目是综合开拓。主要叙述综合开拓的类型和例子。
翻译部分主要内容为长臂工作面顶板的分类。
ABSTRACT
This design includes of three parts: the general part, special subject part and translated part.
The general part is a design of hangxiaolou mine. Zhangxiaolou mine lines in NorthWest of Xuzhou in Jiangsu province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 3.53 km ,the width is about 5.8 km,well farmland total area is 16.94 km 2.The seven and nine is the main coal seam, and its dip angle is 20 degree. The thickness of the mine is about 5.00m in all. The proved reserves of the minefield are 114.9 million tons. The recoverable reserves are 81.9 million tons. The designed productive capacity is 0.9 million tons percent year, and the service life of the mine is 63 years. The normal flow of the mine is 21 m3 percent hour and the max flow of the mine is 30 m3 percent hour. The mineral well gas gushs the deal lower, for low gas mineral well.
The well farmland is a multi level in a subvertical well to expand.
The working system “three-eight” is used in the Zhangxiaolou. It produced 330d/a.
This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.Development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms.
A special subject part of
您可能关注的文档
- 大学毕业设计论文-幼儿园课程设计与活动指导复习题纲.doc
- 大学毕业设计论文-鱼洞河初步设计报告.doc
- 大学毕业设计论文-语文课程与教学论硕士学位试论初中语文学困生的学习问题及其对策.doc
- 大学毕业设计论文-元坝区柳桥乡柳桥村等3个村土地整理项目施工设计报告.doc
- 大学毕业设计论文-园林技术标方案六.doc
- 大学毕业设计论文-原稿,车床传动设计(做第5个)[p=4kw 转速2500 112公比1.41].doc
- 大学毕业设计论文-原油破乳剂的研究及工业应用(论文)模板.doc
- 大学毕业设计论文-远方跳闸保护在终端变电所应用电气自动化论文.doc
- 大学毕业设计论文-云母片冲压工艺及模具设计说明书.doc
- 大学毕业设计论文-云母片冲压工艺及模具设计外文翻译.doc
文档评论(0)