g e n e r i c s p e c i f i c a t i o n f o r multifunction electrical power（g e n e r c s p e c我f f i c t i o n o r多功能电力）（6页）.docVIP

下载本文档

3
0
约1.43万字
约 6页
2017-01-23 发布于四川
举报
版权申诉

g e n e r i c s p e c i f i c a t i o n f o r multifunction electrical power（g e n e r c s p e c我f f i c t i o n o r多功能电力）（6页）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

Guideform Specification EPM9450 – Power Quality Meter 2.0 PRODUCT 2.1 Manufacturer General Electric Company products have been used as the basis for design. Other manufactures’ products of equivalent quality and operating features may be acceptable, at the engineer’s discretion, if they comply with all requirements specified or indicated in these Contract documents. 2.2 Power Meters A. Power meter shall be multi-function 3 phase solid state unit with ability to connect to either 3 phase, 4 wire or 3 phase, 3 wire delta circuits. B. Voltage and current inputs to the meter shall conform to the following at a minimum: 1. Monitor shall accept input of four (4) independent voltage inputs and four (4) independent current inputs of the stated capacity. 2. Voltage input shall be 120 volts AC with available option for direct connection to voltage circuits of up to 600 VAC without the use of potential transformers. 3. Voltage input shall be optically isolated to 2500 volts DC. Shall meet or exceed IEEE 37.90.1 (Surge Withstand Capability) 4. Current input shall be rated for 5 amps with a continuous input capability of 10 amps. 5. Current inputs shall be solid U-Bolt stud inputs with a 10 second over-current rating of 100 amps and a 1-second over-current rating of 300 amps. C. Power meter shall measure and report the following quantities at a minimum: 1. Voltage, both phase to neutral and phase to phase, for all three phases; Auxiliary voltage; Phase angles for each voltage relative to each other. One cycle, 50 millisecond and one-second readings shall be available simultaneously. 2. Current, phase A, B, C, N-measured, and N-calculated; Phase angles for each current relative to voltages. One cycle, 100 millisecond and one-second readings shall be available simultaneously. 3. Watts (total and per phase), VARs (total and per phase), VA (total and per phase), Power Factor (total and per phase) and Frequency. 100 millisecond and one second readings shall be avail