king saud university- k s u faculty memberwebsites（沙特国王大学- k s u memberwebsites教师）（11页）.docVIP

下载本文档

14
0
约1.75万字
约 11页
2017-01-23 发布于四川
举报
版权申诉

king saud university- k s u faculty memberwebsites（沙特国王大学- k s u memberwebsites教师）（11页）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

king saud university- k s u faculty memberwebsites（沙特国王大学- k s u memberwebsites教师）（11页）

King Saud University ChE 313 College of Engineering Tutorial # 1, Chemical Engineering Dept. Section no: Heat Transfer Operations Good Luck Dr. Anis H. Fakeeha In the figure, which material has the higher thermal conductivity? Why? Find the heat loss per m2 of surface through a brick wall 0.5 m thick when the inner surface is at 400 K and the outside at 310; the thermal conductivity of the brick may be taken as 0.7 W/m.K. A square silicon chip 7 mm by 7 mm in size and 0.5 mm thick is mounted on a plastic substrate. The top surface of the chip is cooled by a synthetic liquid flowing over it. Electronic circuits on the bottom of the chip generate heat at a rate of 5 watts that must be transferred through the chip. Estimate the steady-state temperature difference between the front and the back surfaces of the chip. The thermal conductivity of silicone is 150 W/ m K. Heat is transferred at a rate of 0.1 kW through glass wool insulation (density = 100 kg/m3 ) of 5 cm thickness and 2 m2 area. If the hot surface is at 70 oC, determine the temperature of the cooler surface. Calculate the heat loss through a 1-m by 3-m glass window 7 mm thick if the inner surface temperature is 20 oC and the outer surface temperature is 17 oC. Comment on the possible effect of radiation on your answer. A wall of a furnace 0.244 m thick is constructed of material having a thermal conductivity of 1.3 W/m. K. The wall is insulated on the outside with material having an average k of 0.346 W/m.K, so that the heat loss from the furnace will be equal to or less than 1830 W/m2. The inner surface temperature is 1588 K and the outer 299 K. Calculate the thickness of insulation required. King Saud University ChE 313 College of Engineering Tutorial # 2, Chemical Engineering Dept. Section no: Heat Transfer Operations Good Luck Dr. Anis H. Fakeeha Wearing layers of clothing in cold weather is often recommended because dead-air spaces between the layers keep the