热电偶与热电阻检测装置的测量讲解.doc

毕业设计（论文） 多路热电偶（热电阻检定装置设计 学 院 控制工程学院 专 班级姓名 指导教师 2015 年月 日 摘要 本次设计主要是针对K型热电偶进行多路检测，设备一次可以检定十个K型热电偶，既提高了工作速度，又可以保证生产的质量，在本次设计中还设计了上位机界面，用来对热电偶检定结果的相关数据进行显示，以及打印和保存。 在本次设计中我们主要应用MC9S12XS128进行下位机的控制，这包括对CD4067的控制来完成对不同热电偶检定的顺序控制，和对AD7705放大以及AD转换模块的控制以实现热电偶测温后的温度处理步骤。 此装置通过上位机处理热电偶的检定和定级，下位机处理热电偶的测温过程，通过与标准热电偶的测温过程的比较，即可得出待测热电偶和标准热电偶在同一温度加热下，测量值的不同，进而确定待测热电偶的误差并将热电偶分成不同的等级。 关键词：热电偶，检定装置，上位机  Multiple thermocouples (heat resistance) test device design Author：Zhou xiao ying Tutor：Qi shi qing AbstractIn this paper, we design a suitable for large factory multiplex heat resistance temperature thermocouple calibration device, this set of equipment can be used to use for a period of time of the thermocouple, heat resistance for verification, to meet the requirements in the process of industrial production, prevent due to the inaccurate of a thermocouple lead to produce defective products. This design mainly for K type thermocouple multiplex detection, ten thermocouple device can test at a time, can not only improve the working speed, and can guarantee the quality of production, in this design also designed the PC interface, used to display a thermocouple calibration results of relevant data, and print and save. We mainly in the design application MC9S12XS128 lower machine control, including the control of the CD4067 to complete the order of different thermocouple calibration control, and the AD7705 and to enlarge the AD conversion module to realize the control of the temperature of the thermocouple temperature measurement after processing steps. This device by PC processing thermocouple calibration and grading, lower machine processing of thermocouple temperature measurement process, comparing with the standard of thermocouple temperature measurement process, can be obtained for the