端子铆压准规范.docVIP

端子铆压标准规范 0. 目的: 为确保本公司于生产过程中,端子压着能符合品质需求而制订此规范. Purpose: Ensure crimping meets quality requirement. 0. 范围: 此规范适用于各类端子压着检验. Scope: Used to inspect all kinds of terminal crimping. 权责: Responsibility 制造部：依此规范进行生产. Manufacturing Dept.: Product according this criterion. 质量部：负责依此规范进行检验. Quality Assurance Dept.: Inspect according to this criterion. 0.定义:无. (Definition: None) 0.内容: Content 5.1. 端子正确铆压标准：(Crimp rightly according to the following) 端子的外模压着绝缘外被铆压部分须在端子内模与外模间距的1/2或2/3的位置即可。 Jacket between inner mould and outer mould of terminal is 1/2 to 2/3 away from near edge of outer mould