1968 corvette wiper system（1968年corvette雨刷系统）.docVIP

1968 Corvette Wiper System Wiper door Operation Vacuum Reserve Tanks Check Valve- The tanks are used to store vacuum and is located under the left fender near the cowl. The check valve is used to allow vacuum into the intake manifold. The check valve is located in vacuum harness near the center of the cowl. Both these items are also part of the headlamp vacuum system. Vacuum Control Solenoid- The control solenoid is electrically actuated but is used to control vacuum at the Vacuum Relay Valve Diaphragm. The solenoid is mounted on the tachometer housing under the dash. Vacuum Relay Valve-