num系统参数培训2范例.pptVIP

SAMPLING PERIOD P50 parameter is directly involved in performances of the system, knowing that at least, 18 samplings are necessary for exact definition of a sine curve on one period. MEASURED AXES MEASURED AXES It is possible to modify the measured position in MDI by programming, when the axis is declared measured only. Example: E90000 = 50000 Note: The value of P2 can be read in E931xx (read-only parameters). INITIALISATION IN INCHES OR METRIC UNITS IMPORTANT NOTE: P7 is a multi-functions parameter. The status of other bits must not be changed. AXIS MEASUREMENT COEFFICIENT CONVERSION AXIS