道桥毕业设计计算书(终极)(图纸)解析.docVIP

 摘 要 本设计题目为株洲市枫溪连续刚构大桥（又名株洲六桥），株洲湘江六桥位于“中环”建宁大桥与“内环”天元大桥之间，距上游建宁大桥2.5公里，距下游天元大桥3.8公里。大桥北起黄河南路，止于航空大道与曲尺大道的交叉口。向南上跨滨江路，越湘江，再先后跨越芦淞区规划中的沿江路、天池路，终于江弯路，是河西城区与河东枫溪生态城、航空新城片区之间的快速过江通道。m，双向四车道，上部结构采用连续的预应力混凝土连续箱型型刚构桥。 在设计过程中，综合考虑了材料以及结构的强度、刚度、稳定性，还注意到了混凝土强度以及钢筋等级及其性能。本文主要介绍了枫溪大桥上部结构设计，包括主桥形式选择，上部结构尺寸拟订，内力计算，桥面板计算，内力组合，预应力钢束设计以及强度验算和应力验算，运用了先进的理论技术、材料、工艺来解决设计和施工中存在的实际问题。 本设计参阅了很多相关设计及规范，也采用了一些既有设计成果，使得设计具有一定的实践性，同时也采用了桥梁来计算桥梁结构内力，节约了设计时间，设计过程中得到指导老师的悉心指导及帮助，使我的设计事半工倍，在此对设计界的前辈及指导老师表示衷心的感谢！ 由于设计时间仓促，加上本人经验有限，设计中难免会有许多不足或缺点，请大家提出宝贵意见及建议。 关键词：连续刚构，组合内力，预应力，桥梁博士  ABSTRACT The topic of this design for Zhuzhou City Fengxi continuous rigid frame bridge (also known as Zhuzhou six bridges), Zhuzhou Xiangjiang River Bridge is located in the central Jianning bridge and inner Tianyuan bridge between, 2.5 km away from the Jianning bridge upstream, 3.8 km away from the downstream Tianyuan bridge. North Bridge, the Yellow River South Road, the intersection stop at aviation Avenue and Avenue square. Southward cross Binjiang Road, the Xiangjiang River, and has crossed Lusong district planning along the Yangtze River Road, Tianchi Road, finally the river curved road, Hexi District, Hedong Fengxi eco city, aviation metro area between the rapid river channel. The bridge span is 80+140+80m, and the two-way four lane, the upper structure is continuous prestressed concrete continuous box type rigid frame bridge. In the design, the strength, rigidity and stability of the materials and the structure are considered comprehensively, and the concrete strength and the grade of the reinforcement and the performance of the reinforcement are also noted.. This paper mainly introduces the design of maple Creek bridge superstructure, including main bridge form selection, size of the upper structure to formulate, internal force calculation, calculation of bridge deck, combination of internal forces, prestressed steel beam design and strength calculation and checking, advanced theory