进口切边机术合同描述.doc

Technical Contract of The high slitting line 高速切边机技术合同 上海大屯能源股份有限公司 2008年9月 APPENDIX 2.1 Design basis data 附件2.1 设计参数 2.1 DESIGN BASIS 2.1.1 MATERIAL-SPECIFIC DATA Alloys to be processed Material: Aluminum alloys Aluminum and its alloys: series 1xxx, 3xxx, 5xxx and 8xxx Material condition: strip in dry condition; with a maximum of 50 mg/m2 each side of rolling oil on the surface; Temper: Soft (O) – Hard (H19) Tensile strength: 80 … 450 N/mm2 Yield strength: 30 … 350 N/mm2 Elongation: 5 % The coils to be