基于modbus的远程温湿度监控系统的设计与实现大学毕业论文.docVIP

CHANGZHOU INSTITUTE OF TECHNOLOGY 毕 业 设 计 说 明 书 题目：基于modbus协议的温湿度监控系统的设计与研究 二级学院（直属学部）：计算机信息工程学院 专业：计算机科学与技术 班级：12计 学生姓名： 学号： 指导教师姓名： 职称：讲师 评阅教师姓名： 职称： 2016年5月 基于modbus协议的温湿度监控系统的设计与研究 摘要 如今很多企业拥有多个仓库，仓库温湿度监测面临很难操作的境地。作为库房管理的重要指标，仓库温湿度需要进行信息化管理，同样能实现仓库管理自动化。现在，温湿度监测系统的主要技术有CAN总线通信设计，计算机集成控制技术和共享总线型传输媒体方式的局域网使用的CSMA/CD技术。 本文采用的是已广泛利用的MODBUS协议实现的检测系统，此系统具有有实时性好，准确率高等特点，在模拟两个控制设备之间的相互传输，i/o及寄存器数据时，MODBUS的兼容性好等原因决定了它成为综合管理系统的接口。 文章中对各监控系统的优势长短及适应范围对比分析，选择了合适的监控系统的设计方案。选择了基于MODBUS协议的监控系统，在自动化，综合管理系统，传输准确性等不同条件下的满足。论文中介绍了各芯片硬件设计及软件设计，描绘了设计和研究思想。 关键词：计算机集成控制技术；MODBUS协议；自动化；综合管理系统；温湿度监测BASING ON MODBUS PROTOCOL, DESIGN AND RESERCH OF REMOTE TEMPERATURE AND HUMIDITY MONITORING SYSTEM Abstract Now, many companies have a lot of warehouses. But it is hard for us to monitor the temperature and humidity of the warehouses. As an important indicator of warehouse management, warehouse temperature and humidity needs informational management, also can achieve the automation of warehouse management. Now, the main technology of temperature and humidity monitoring system is CAN bus communication design, computer integrated control technology and shared bus transmission media mode of local area network using CSMA/CD technology. The detection system which has been widely used in the Modbus protocol is adopted in this paper. This system has good real-time, high accuracity, in the simulation of the mutual transfer between two control devices, I / O and register data, MODBUS compatibility making it integrated management system interface. In this paper, basing on the advantages of each monitoring system and the scope of adaptation of the comparative analysis, we select the appropriate monitoring system design. We choose the monitoring system based on MODBUS protocol, in the automation, the integrated management system, the transmission accuracy and so on under the different conditions of satisfaction.