桥梁工毕业设计论文4.12.docVIP

摘 要 本设计为桥梁工程设计，首选根据地勘资料，拟定了三个比选方案，然后根据施工要求和经济效益，采用了（6x35）m先简支后连续预应力小箱梁桥为最佳方案，并初步拟定结构尺寸，然后利用桥梁博士软件进行全桥安全性验算，根据验算结果对结构尺寸进行优化，最后得到符合规范要求和设计任务的设计结果。 关键词：桥梁工程；先简支后连续；小箱梁；安全性验算；规范 ABSTRACT This bridge engineering design. First of all, the choice according to geological exploration data, proposed three ratio, and then according to the construction requirements and economic benefits, using the (6x35) metres Simply supported continuous prestressed box girder bridge as the best solution, and to structure size, and then use bridge bridge safety and checking calculation of Dr Software, optimize th